Stan Cook Stan Cook's Profile Page

Stan Cook Stan Cook

0 Course Enrolled • 0 Course Completed

Biography

100-150 Exam Torrent: Cisco Certified Support Technician (CCST) Networking - 100-150 Prep Torrent & 100-150 Test Braindumps

P.S. Free 2025 Cisco 100-150 dumps are available on Google Drive shared by Actual4Labs: https://drive.google.com/open?id=1C4Q9mWQa9SEeG7xj3hQTR3NZUy0EqWJC

If you still have no confidence for passing test, here we will recommend you an excellent reference material. Our valid 100-150 exam collection pdf will help you pass exam and go to success, you will approach to IT field top. You can just spend short time in preparing for real test with our latest 100-150 Exam Collection Pdf. You can download free demo in our website for your reference to verify the reliability of our dumps before purchasing.

Our company has always been following the trend of the 100-150 certification. Our research and development team not only study what questions will come up in the exam, but also design powerful study tools like 100-150 exam simulation software. This Software version of our 100-150 learning quesions are famous for its simulating function of the real exam, which can give the candidates a chance to experience the real exam before they really come to it.

>> 100-150 Exam Preparation <<

100-150 Certification Exam Infor, Exam 100-150 Guide

Our 100-150 real exam is written by hundreds of experts, and you can rest assured that the contents of the 100-150 study materials are contained. After obtaining a large amount of first-hand information, our experts will continue to analyze and summarize and write the most comprehensive 100-150 learning questions possible. And at the same time, we always keep our questions and answers to the most accurate and the latest.

Cisco Certified Support Technician (CCST) Networking Sample Questions (Q12-Q17):

NEW QUESTION # 12
What is the purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch?

A. To enable the switch to act as a default gateway for the attached devices
B. To enable the switch to provide DHCP services to other switches in the network
C. To enable the switch to resolve URLs for the attached the devices
D. To enable access to the CLI on the switch through Telnet or SSH

Answer: D

Explanation:
The primary purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch is to facilitate remote management of the switch. By configuring an IP address on the management VLAN, network administrators can access the switch's Command Line Interface (CLI) remotely using protocols such as Telnet or Secure Shell (SSH). This allows for convenient configuration changes, monitoring, and troubleshooting without needing physical access to the switch1.
References :=
*Understanding the Management VLAN
*Cisco - VLAN Configuration Guide
*Remote Management of Switches
Assigning an IP address to the management VLAN interface (often the VLAN 1 interface by default) on a Layer 2 switch allows network administrators to remotely manage the switch using protocols such as Telnet or SSH. This IP address does not affect the switch's ability to route traffic between VLANs but provides a means to access and configure the switch through its Command Line Interface (CLI).
*A: The switch does not act as a default gateway; this is typically a function of a Layer 3 device like a router.
*B: The switch does not resolve URLs; this is typically a function of DNS servers.
*C: The switch can relay DHCP requests but does not typically provide DHCP services itself; this is usually done by a dedicated DHCP server or router.
Thus, the correct answer is D. To enable access to the CLI on the switch through Telnet or SSH.
References :=
*Cisco VLAN Management Overview
*Cisco Catalyst Switch Management

NEW QUESTION # 13
HOTSPOT
You plan to use a network firewall to protect computers at a small office. For each statement about firewalls, select True or False.
Note: You will receive partial credit for each correct selection.

Answer:

Explanation:

Explanation:
A firewall can direct all web traffic to a specific IP address.
True: Firewalls can be configured to perform Network Address Translation (NAT) and port forwarding, which can direct all web traffic (typically on port 80 and 443) to a specific internal IP address.
A firewall can block traffic to specific ports on internal computers.
True: Firewalls can be configured with access control lists (ACLs) or rules to block traffic to specific ports on internal computers, enhancing security by restricting unwanted or harmful traffic.
A firewall can prevent specific apps from running on a computer.
False: Firewalls typically control traffic flow and do not prevent specific applications from running on a computer. Application control is usually managed by endpoint security software or application control systems.
Directing Web Traffic: Firewalls can manage traffic redirection using NAT and port forwarding rules to route web traffic to designated servers or devices within the network.
Blocking Specific Ports: Firewalls can enforce security policies by blocking or allowing traffic based on port numbers, ensuring that only permitted traffic reaches internal systems.
Application Control: While firewalls manage network traffic, preventing applications from running typically requires software specifically designed for endpoint protection and application
management.
Reference: Understanding Firewalls: Firewall Capabilities
Network Security Best Practices: Network Security Guide

NEW QUESTION # 14
Which information is included in the header of a UDP segment?

A. IP addresses
B. MAC addresses
C. Port numbers
D. Sequence numbers

Answer: C

Explanation:
The header of a UDP (User Datagram Protocol) segment includes port numbers. Specifically, it contains the source port number and the destination port number, which are used to identify the sending and receiving applications. UDP headers do not include IP addresses or MAC addresses, as those are part of the IP and Ethernet frame headers, respectively. Additionally, UDP does not use sequence numbers, which are a feature of TCP (Transmission Control Protocol) for ensuring reliable delivery of data segments1.
References :=
* Segmentation Explained with TCP and UDP Header
* User Datagram Protocol (UDP) - GeeksforGeeks
* Which three fields are used in a UDP segment header
* UDP Header: The header of a UDP segment includes the following key fields:
* Source Port: The port number of the sending application.
* Destination Port: The port number of the receiving application.
* Length: The length of the UDP header and data.
* Checksum: Used for error-checking the header and data.
* IP Addresses: These are included in the IP header, not the UDP header.
* Sequence Numbers: These are part of the TCP header, not UDP.
* MAC Addresses: These are part of the Ethernet frame header and are not included in the UDP header.
References:
* RFC 768 - User Datagram Protocol: RFC 768
* Cisco Guide on UDP: Cisco UDP Guide

NEW QUESTION # 15
An engineer configured a new VLAN named VLAN2 for the Data Center team. When the team tries to ping addresses outside VLAN2 from a computer in VLAN2, they are unable to reach them.
What should the engineer configure?

A. Static route
B. Default gateway
C. Additional VLAN
D. Default route

Answer: B

Explanation:
When devices within a VLAN are unable to reach addresses outside their VLAN, it typically indicates that they do not have a configured path to external networks. The engineer should configure a default gateway for VLAN2. The default gateway is the IP address of the router's interface that is connected to the VLAN, which will route traffic from the VLAN to other networks12.
References :=
*Understanding and Configuring VLAN Routing and Bridging on a Router Using the IRB Feature
*VLAN 2 not able to ping gateway - Cisco Community
*VLANs: Virtual Local Area Networks (VLANs) logically segment network traffic to improve security and performance. Devices within the same VLAN can communicate directly.
*Default Gateway: For devices in VLAN2 to communicate with devices outside their VLAN, they need a default gateway configured. The default gateway is typically a router or Layer 3 switch that routes traffic between different VLANs and subnets.
*Additional VLAN: Not needed in this scenario as the issue is related to routing traffic outside VLAN2, not creating another VLAN.
*Default Route: While a default route on the router may be necessary, the primary issue for devices within VLAN2 is to have a configured default gateway.
*Static Route: This is used on routers to manually specify routes to specific networks but does not address the need for a default gateway on the client devices.
References:
*Cisco VLAN Configuration Guide: Cisco VLAN Configuration
*Understanding and Configuring VLANs: VLANs Guide

NEW QUESTION # 16
A local company requires two networks in two new buildings. The addresses used in these networks must be in the private network range.
Which two address ranges should the company use? (Choose 2.)
Note: You will receive partial credit for each correct selection.

A. 192.16.0.0 to 192.16.255.255
B. 172.16.0.0 to 172.31.255.255
C. 11.0.0.0 to 11.255.255.255
D. 192.168.0.0 to 192.168.255.255

Answer: B,D

Explanation:
The private IP address ranges that are set aside specifically for use within private networks and not routable on the internet are as follows:
* Class A: 10.0.0.0 to 10.255.255.255
* Class B: 172.16.0.0 to 172.31.255.255
* Class C: 192.168.0.0 to 192.168.255.255
These ranges are defined by the Internet Assigned Numbers Authority (IANA) and are used for local communications within a private network123.
Given the options: A. 172.16.0.0 to 172.31.255.255 falls within the Class B private range. B. 192.16.0.0 to
192.16.255.255 is not a recognized private IP range. C. 11.0.0.0 to 11.255.255.255 is not a recognized private IP range. D. 192.168.0.0 to 192.168.255.255 falls within the Class C private range.
Therefore, the correct selections that the company should use for their private networks are A and D.
References :=
* Reserved IP addresses on Wikipedia
* Private IP Addresses in Networking - GeeksforGeeks
* Understanding Private IP Ranges, Uses, Benefits, and Warnings

NEW QUESTION # 17
......

Cisco 100-150 Exam Dumps are one of the best ways to prepare for your Cisco 100-150 certification exams. They offer an excellent range of study materials and practice tests that can help you become certified in no time. These Cisco 100-150 Exam Dumps are also updated regularly to ensure that you are always up to date with the latest information.

100-150 Certification Exam Infor: https://www.actual4labs.com/Cisco/100-150-actual-exam-dumps.html

Occasionally the interview is overly-rigorous, that is, someone in HR who knows nothing about 100-150 has a set of questions they looked up on the internet, and they neither understand the 100-150 question, nor the answer, Therefore, 100-150 Certification Exam Infor - Cisco Certified Support Technician (CCST) Networking Dumps VCE files save a large proportion of money as it is a really economical decision, Don't worry; Actual4Labs 100-150 Certification Exam Infor will make you closer to your dream.

Using Meta Tags or any other "hidden text" utilizing the Company's name or trademarks, Exam 100-150 Guide But what about features and functionality that you need for your game or world that are not part of the core feature set of the server you are using?

Expert Validation Use Up-to-Date Q&As to Pass the Cisco 100-150 Exam

Therefore, Cisco Certified Support Technician (CCST) Networking Dumps VCE files save a large proportion 100-150 of money as it is a really economical decision, Don't worry; Actual4Labs will make you closer to your dream.

We have one-year service for every customer who purchases our 100-150 test questions and dumps, How to get the test 100-150 certification in a short time, which determines Premium 100-150 Files enough qualification certificates to test our learning ability and application level.

BTW, DOWNLOAD part of Actual4Labs 100-150 dumps from Cloud Storage: https://drive.google.com/open?id=1C4Q9mWQa9SEeG7xj3hQTR3NZUy0EqWJC